Housings for cartridges are available for the 4 standard sizes of cartridges, namely :
- Ø2,5"× 10" or Ø63,5 mm x 254 mm
- Ø2,5"× 20" or Ø63,5 mm x 508 mm
- Ø2'5"× 30" or Ø63,5 mm x 762 mm
- Ø2,5"× 40" or Ø63,5 mm x 1016 mm
Besides these four sizes mentioned above, there are of course an innumerable special sizes for which the housings were made in limited quantities. However, it's always best to choose a standard size as well as for economic reasons and interchangeability .
The materials used for housings are usually the stainless steel 316l or rarely Stainless 304. If the product is very corrosive to filter other alternatives can be considered as
polypropylene, PVDF or Hastelloy (super alloy containing mainly Nickel)
For higher flow rates (20-25m³/Hour) , the high flow cartridge offers an interesting alternative to the standard sizes cartridges. Indeed, its retention capacity of 7 kg and its pression drop is only 90mbar for a flow of 23m³/h to the original. It's equivalent to 50 standard cartridges of 40".
Its dimensions are as follows :
- Ø6,5"× 40" ou Ø165 mm x 1016 mm